Tips for solving poor zipper pulling

Life 9:07am, 27 June 2025 59

Tips for solving poor zippers

The zippers of clothes have been used for a long time, and the wear will cause the zippers to be unable to be pulled or pulled. Today I will share two small steps, and the zipper can return to normal!

1. The main reason why the zipper cannot be pulled is that the distance between the two cards on the zipper is extended or wide on the left and right is enough to use pliers to gently clamp up and down or clamp left and right. Be careful not to use too much force to avoid breaking the zipper head! After repairing, you can apply a little wax to the zipper, which will make it smoother to use in the future. If you clamp it with pliers several times and it breaks again in a few days, you should consider replacing the zipper head.

2. Can't pull it

If the zipper cannot be pulled no matter how hard it is, you can apply soap or wax on it, then slide it up and down and back a few times, and the zipper can be pulled.

3. Tips for using zippers:

In order to avoid frequent zippers in clothes, there are also some tips when using zippers on weekdays!

1. Do not pull it too tightly to avoid tension.

2. Don’t pull it too quickly or too hard, and don’t pull it hard.

3. Be sure to pull the zipper up when washing clothes, otherwise the zipper will twist arbitrarily through water washing and washing machine and dryer, causing the zipper serration to fall off and damage.

4. Apply a layer of wax to the zipper frequently and pull it back and forth to make sure it is smooth.

5. Check the zipper frequently and pay attention to whether there are any phenomena such as "toothing &rdquo", "skew" and other phenomena. If it is loose, you can use a small hammer to gently press the zipper head to make the upper and lower serrated teeth tighter, and the serrated teeth will not fall off frequently.