Bath mirror selection knowledge - The maintenance and cleaning of bath mirrors

Bath mirror selection knowledge

Compared with ordinary mirrors, bath mirrors must be “ three-proof ”: waterproof, rust-proof, and fog-proof. An ordinary mirror reflects a person's image from a distance, but when you look closely, you often have subtle deformation and slimness, which is mainly because the mirror body plating is uneven. In addition, if ordinary mirrors are placed in wet places for a long time, the mirror surface will become dim and the coating will fall off due to rust.

Because the bath mirror must be waterproof and rust-proof in the place where it is placed, it mostly uses advanced technology. The sterling silver coating will make the mirror clearer and the image more realistic. In addition, the coating needs to be closely combined with the mirror to have a good waterproof and rust-proof effect. When purchasing a bath mirror, you only need to see whether the portrait is floating up and down or left and right, and see if the straight edge object is bent and deformed, and you can know whether the bath mirror coating is good or bad.

Of course, the anti-fog function of the bath mirror is also very important. If you want to avoid facing the foggy mirror after bathing, you must make the mirror have anti-fog function. The anti-fog bath mirrors sold on the home furnishing market mostly use electric heat and anti-fog. After power-up, electric heat will increase the temperature of the mirror surface and the fog will evaporate rapidly, so that the mirror surface cannot form a fog layer. But anti-fog bath mirrors are usually expensive.

When purchasing a bathroom mirror, you should observe its quality from multiple angles on the front, side and reverse. When a person looks at a mirror, he usually only pays attention to his own image in the mirror, and does not pay attention to the linear objects far away in the mirror. When you gently move your vision, if the linear objects are not bent and deformed, this is a mirror with absolutely good quality. Pay attention to the creation of bathrooms and selecting good bathroom products and sanitary ware, which can create a good bathroom environment. Cleaning of the

bath mirror

1. Wipe the mirror with a soft dry cloth or cotton to prevent the mirror from being scratched.

2. Use a soft cloth and dip it in some kerosene or wax to wipe it.

3. Wipe the mirror and frame with a rag dipped in milk to make it clear and bright.

4. Wipe with oil-absorbing paper, the effect is good. Another thing is to wipe it with newspapers, so that the mirror will not leave any hair. The mirror will be very bright when rubbed. Maintenance of

Bath mirror

1. Do not touch the mirror with wet hands, and do not wipe the mirror with a damp cloth to avoid increasing moisture invasion.

2. The mirror cannot contact salt, grease and acidic substances, which are prone to corroding the mirror surface.

3. Apply the isolation layer: Dip a dry rag in an appropriate amount of dishwashing liquid, shaving cream, etc. on the mirror, apply it evenly. After staying for a period of time, the dishwashing liquid and shaving cream will form an isolation layer to isolate the mirror from the water vapor in the air.

4. Installation of defog patches: A special electronic defog patch can play a role in continuous defog. The electronic defog patch is very thin and installed on the back of the mirror. After powering on, the electrical energy can be directly converted into heat energy and transmitted to the surface of the mirror, which can effectively prevent water vapor from condensed on the surface of the mirror.

5. Before taking a bath, you can apply soap to the mirror surface and wipe it with a dry cloth. A layer of soap film will be formed on the mirror surface to prevent the mirror surface from blurring.

6. Astringent lotion or dishwashing liquid can also be used.