Use a stainless steel spoon to lightly pry the edge of the bottle cap. When it is pried open a little, gas will enter, and the bottle can be opened easily. What should I do if the glass can cannot be opened? What should I do if the bottle cap cannot be opened?

How to open the can cap

Cans are believed to be the favorite of most people, but it is not that easy to eat it. Opening the bottle cap is a hard work, so how to open the can cap easily?

1. First we select tape about 25-30 cm.

2. Then stick the tape to the bottle cap of the can and paste counterclockwise (be careful not to stick the glass bottles together).

3. When it is about halfway through, fold the tape in half and make a handle.

4. Then hold the upper edge of the glass bottle with your left hand, hold the handle with your right hand, and apply force horizontally.

5. The can was easily opened.

What to do if the glass can cannot be opened?

What to do if the glass can cannot be opened? The canned bottle is glass and cannot be pried with tools. Of course, you can't break the bottle body of the can!

Tool treasure box: a box of cans, a basin of water, boiling water, and a pair of insulated gloves.

1. Carefully inject half of boiling water into the basin; put the bottle cap part of the can with boiling water for half a minute, and then remove it; put on insulation gloves, then lift the bottle cap up with your hands, and the bottle will be opened without any effort.

2. Wash and dry your hands with clean water, so that you can remove sweat or oil from your palms. The palms will not slip and the rotation resistance will increase. Grasp the can cap with your left hand and turn it upside down, so that the bottom of the bottle is facing upwards, and reshot it three times with your right palm. Then, make the canned bottle face upwards, fix the bottle body with your right hand, and twist the lid with a little force on your left hand, “ "Pan”"! The lid is opened.

What to do if the iron cans cannot be opened

What to do if the iron cans cannot be opened?

1. Observe that there is a little more iron on the iron can, like a cigarette without Kaifeng. You can follow the leaking iron at the hole of the iron key, then twist the key and then open it. I just want to open the packaging film of the cigarette, but it is metal. I need to use the key ox

2. Buy a Swiss Army Knife with a tool that specializes in opening this kind of can. It is also OK to imitate it, but it is not as sharp as this. Generally, there should be a can tool that looks like a key. There is a protruding strip on the can. Using that tool, you can easily open the can.

3. When there are no tools, you can directly grind the bottom of the can on the ground. After grinding off the folding edges, it will be easy to open. It’s very simple. Take a kitchen knife, tilt upwards, and use the knife at the lower end to knock out the small mouth along the circle bit by bit, making it a little patient. It would be even better if there was a special tool for opening cans.

4. On the side of the can, pry the protruding part first, and then roll it open with the special tool on the box. Find a short section of iron sheet on the can that is easy to lift, and pass the iron sheet through the small hole in the can open key and roll it along the lines.

5. Put it flat on the ground and push it forward and backwards, and it will be worn through in a few strokes. After grinding it, you can grind it off or break it. Then find a hard object and pry it open the lid of the can. Then, knock it again, and the whole canned meat will come out without breaking the shape at all.

6. Smash it flat on the ground, and after a few hits, the edges will be opened. Then find a hard object and pry it around and pry it open the lid of the can. Then, knock it again, and the entire canned meat will come out. Of course, the shape will be a little damaged.

What to do if the bottle cap cannot be opened

There are seasoning bottles in the kitchen, beverage bottles in the refrigerator, and pickled vegetables bottles on the dining table. Especially those glass bottles are paired with metal bottle caps, and the bottle caps are slippery when they are just competing, but they can't be opened if they are alive. The following three tricks allow you to unscrew the bottle cap.

capper

Method: Choose a suitable type of capper according to the size of the cap and put the serrated part on the cap. Just turn it with your hands.

Note: Use this gadget, because rubber can increase friction, the bottle cap is easier to open. Similarly, if you wear rubber gloves for washing dishes at home, you can use them to open the bottle after wearing them.

Soil in hot water:

When encountering a bottle that is difficult to pry with a spoon, try pouring boiling water into the bowl, soaking the bottle mouth for a few seconds, and then twisting it open. Usually, the bottle will be easily opened after the principle of heat expansion.

Spoon lightly prying the bottle cap

Principle: Some large seasoning bottles are not easy to open even with a bottle opener, so it requires a little external force.

Method: Use a stainless steel spoon to lightly pry the edge of the bottle cap. When you pry it a little, gas will enter, and the bottle can be opened easily.